++++++++++++++++++++
WebKit Install Guide
++++++++++++++++++++

.. contents:: Contents


Introduction
============

WebKit provides an application server that runs on both Unix and
Windows as a persistent application (i.e., an application that stays
running over the span of multiple requests).

This install guide takes you through the installation process while
showing you what options are available and how you would use
them. There are notes for specific operating systems and web servers
preceded with tags such as **Unix**, **WinNT**, **IIS**, etc.

WebKit is fairly easy to install, but there are some important things
to know. You will be doing yourself a favor by reading through this
guide from top to bottom (skipping sections that don't apply to you).

We recommend that you get a simple configuration working first,
where you can access the examples provided with Webware.  Once you've
gotten to that point, the remaining customization of the environment
is fairly simple.

We use the term *deploy* to mean installing your web application/site
in a well known location for access by your users. You first *develop*
your web application and then *deploy* it. You will see deployment
specific notes throughout the guide since the issues for these two
situations can be different. In a nutshell, you want convenience
during development, and security and performance during deployment.

You can always e-mail webware-discuss@lists.sourceforge.net to give
feedback, discuss features and get help using WebKit.


Quick Start
===========

If you just want to get to a working configuration fast,
install python,
unpack your Webware distribution,
and do the following
(use backslashes instead of slashes if you are using Windows)::

    $ cd path/to/Webware
    $ python install.py
    (enter password)
    $ WebKit/AppServer

You should now be able to go to your browser and open up the URL
``http://localhost:8080``.
The page you see is generated by ``WebKit/Examples/Welcome.py``.

If the AppServer fails with the error message ``Address already in use``,
you will need to tell it to use a different port number.
Edit ``WebKit/Configs/AppServer.config``, set ``AdapterPort``
and ``HTTPPort`` to unused port numbers, restart AppServer,
and alter your URL accordingly.

The AppServer has to be running anytime you want to access a
Webware application or example.  The last line of the instructions
above is a simple way to start the AppServer in the console window
you are working in.  (There are scripts to run it
automatically at boot up, see `webkit init script`_).


Prerequisites
=============


Python
------

Webware of course requires Python.  It has been tested with Python
version ranging from 2.0 to 2.5.  Python 1.5.2 isn't supported anymore.
If you get an error message about the version, you're probably unwittingly
running the wrong version of Python.  Change the ``AppServer``
or ``AppServer.bat`` scripts, giving the full path to the correct
Python interpreter.

Your installation of Python must be multi-threaded.  It's not entirely
uncommon for third party web host providers to leave this disabled in
Python because they don't expect that it's needed or for compatibility
with some software. If your Python installation is not multi-threaded
you will have to reinstall it.  If you're using a third party host
provider in this situation, you may be able to install it yourself
into your home directory via a telnet or ssh account. See the
`Python site`__ for instructions.

__ http://www.python.org/download/

To determine if threading is enabled, start the Python interpreter
from the command line and enter ``import thread``. If you don't get an
exception, all is well.


Web Server
----------

Webware's built-in web server is adequate for development
and casual use.
Beyond that, you will want to use Webware in concert with
another web server.

Any web server that supports CGI should be usable with
Webware.  Apache is the best supported platform, both on Posix and
Windows systems.  There is some experimental support for Xitami.  For
all other web servers (IIS included) you should expect to use CGI to
interface with the AppServer.

Apache
~~~~~~

Apache is the best supported web server, both on Posix and Windows
systems.  The mod_webkit_ adaptor is the fastest way to connect to
Webware, and is only supported for Apache.  CGI is also available to
Apache users through wkcgi_.  For Windows users compiled versions of
mod_webkit and wkcgi (named ``wkcgi.exe``) are also available.
There are also other adapter options, see Adapters_.

Most of the Webware developers use Apache.

IIS
~~~

Microsoft's Internet Information Server, or IIS, requires some special
configuration due to its default non-standard CGI behavior. You have
to do two things:

For IIS 4.0, configure it to handle PATH_INFO and PATH_TRANSLATED
according to the CGI specification, by running the following command::

  > cscript adsutil.vbs SET W3SVC/1/AllowPathInfoForScriptMappings 1

This is lightly documented in
http://support.microsoft.com/support/kb/articles/Q184/3/20.ASP

`CGI adapter`_, written in C, is available in
``WebKit/Adapters/wkcgi/wkcgi.exe``.  The standard `Python CGI
adapter`_ also works, but you must either configure IIS to run Python
CGI scripts, or you must use Gordon McMillan's Standalone utility
(part of his Installer package) or some other program to create an
executable from the Python.

In order to convert WebKit.cgi into WebKit.exe using the Standalone
utility, you first have to rename it to WebKit.py, and add ``import
socket`` to the top of the file (you could use a configuration file
instead, but this is easier). After creating the ``.exe`` file, delete
``WebKit.pyc`` and rename ``WebKit.py`` to ``_WebKit.py``. This will
avoid conflicts with ``WebKit.exe``.

There is an ISAPI module for Webware in ``WebKit/Adapters/wkISAPI``
that needs to be compiled before use.  However, there have been
problems with memory leaks in this adapter.

AOLserver
~~~~~~~~~

The PyWX__ project aims to meld Python and AOLserver and as part of
that, they created an AOLserver "stay resident" WebKit adapter for
tighter integration. If you find that this adapter does not work
with the latest release of Webware, please notify the PyWX project.

__ http://pywx.idyll.org

Xitami
~~~~~~

The Xitami__ web server purports to be smaller, and potentially easier
to install than some of the other web servers.  It can run the CGI
adapters, but for more speed the `LRWP adapter`_ uses a persistent
process for greater performance.

__ http://www.xitami.com

Other Servers
~~~~~~~~~~~~~

Other servers should work using a `CGI adapter`_.


Webware Version
---------------

Unless you just downloaded Webware (and therefore WebKit), you should
check to see if you have the latest version. This is:

Webware for Python

:Version: 0.9.2
:Released: 09/18/06

You can check for the latest version at http://www.webwareforpython.org.

If you're feeling adventurous, you can get the latest in-development
source code from the public repository. Instructions are located at
the `Webware SVN page`__. You can find more information about SVN in
general in the `Subversion Book`__. The SVN version of Webware is
generally fairly stable.

__ http://www.webwareforpython.org/Wiki/subversionrepositoryaccess
__ http://svnbook.red-bean.com


Operating Systems
-----------------

WebKit actively supports Posix (Linux, BSD, Mac OS X, Solaris, etc)
and Windows (95/98/NT/2K/XP), and their various flavors.

Note that you don't have to develop and deploy on the same
platform. One of the WebKit developers develops everything on Windows
98 2nd edition and deploys his web sites on BSD.  Some of the web
server setup is different, but in most cases the application itself
will require no porting (unless you specifically use non-portable
Python code in your application).

What follows are some OS specific notes:

Posix/Unix:
  Nothing special to report. Both Linux and BSD have been used
  with WebKit.

Windows 9x:
  Although a lot of the development of both WebKit and various web
  sites that use it has been done on Windows 9x, we don't recommend
  that you use this operating system to actually serve your users.
  Unix and NT are generally more robust and secure and therefore, more
  appropriate for deployment.

Windows:
  Some Windows users are surprised that URLs passed to WebKit are case
  sensitive. While it's true that the various Windows file systems are
  case insensitive, the data structures that WebKit uses internally
  are not.

  When editing path names in configuration files, keep in mind that
  you are editing a Python dictionary populated with Python
  strings. Therefore your paths must either use double backslashes
  (\\) (since the backslash is a special character), use forward
  slashes or use "r-strings". An example of a bad string is
  ``'C:\All\Web\'``. Good examples include:

  * ``'/All/Web'``
  * ``'C:/All/Web'``
  * ``'C:\\All\\Web'``
  * ``'C:\All\Web'``

  It's generally recommended to simply use forward slashes (/) for all
  your file paths.


Installing Webware
==================

Webware's main directory contains an ``install.py`` script that
should always be run first.

Note that the install program doesn't actually copy the Webware files
to any separate directory. It copies files within the Webware
directory tree, modifies permissions, generates documentation, etc.

Also, you can run the install program as many times as you like with
no ill effect, so if you're not sure whether or not it has been run,
feel free to do so again.  If you're debugging a problem with the
installation, you can run ``install.py -v`` for verbose output.


Updating Webware
================

When updating to a new major or minor version of Webware, check whether
the Webware release notes recommend updating or recreating the working
directories of your Webware applications.


Architecture
============

The WebKit architecture involves three main entities at the top level:

* The web browser
* The web server
* The app server

The browser will be something like Microsoft Internet Explorer or
Mozilla. The web server will be something like Apache or IIS. And
finally, the app server will be WebKit, i.e. a Python process running
the WebKit modules and your custom servlets.

.. image:: Architecture.gif
   :align: center

The chronological order of events goes from top to bottom and then
back up to top. In other words, the browser makes a request to the web
server which in turn makes a request to the app server. The response
then goes from the app server to the web server to the browser.

For development and casual use, you can replace Apache with
the WebKit built-in web server that can be activated with the
``AppServer.config`` setting ``EnableHTTP``. The port can be specified
with the setting ``HTTPPort`` and will be ``8080`` by default.

If you are not using the built-in web server, you will have to
get your web server and app server talking to each other.
For this purpose, you must use a WebKit adapter_. You must also
activate the WebKit app server listener for adapters with the
``AppServer.config`` setting ``EnableAdapter``. The port can be specified
with the setting ``AdapterPort`` and will be ``8086`` by default.
You can use several app servers listenting on different ports.


Permissions
-----------

Webware runs as whatever user you run the AppServer as.  So, while
Apache might be running as nobody, if you start the AppServer as
root then your application will be run as root.  You may wish to set
up another user specifically for running the AppServer.  On Unix::

  $ adduser --no-create-home --system webkit
  $ cd path/to/Webware/WebKit
  $ sudo -u webkit ./AppServer

Whatever user you run the AppServer as, there are some directories
under Webware/WebKit/ that must be writable by that user:

* Cache
* ErrorMsgs
* Logs
* Sessions

The easiest way to do this is to make these directories writeable by
all (on Unix, that would be ``cd Webware/WebKit; chmod -R a+rwX
Cache ErrorMsgs Logs Sessions``).

You may wish to set it up this way at first, and review the
permissions and create a new user later.


.. _adapter:

Adapters
--------

A WebKit adapter takes an HTTP request from a web server and, as
quickly as possible, packs it up and ships it to the app server which
subsequently sends the response back to the adapter for delivery to
the web server and ultimately the web client. More concisely, an
adapter is the go-between of the web server and the app server.

There are several adapters for Webware.  However, it is **highly**
recommended that you either use wkcgi_ or mod_webkit_.  Mod_webkit is
the fastest adapter, but requires you to use Apache and usually to
have root access to the computer.  Wkcgi uses CGI, and so is easy to
install.  Because it's small and written in C, wkcgi is still very
fast.

All the adapters:

* wkcgi_, C-based CGI script
* mod_webkit_ (fastest!)
* AOLServer_
* LRWP_ (Xitami)

These adapters are not really recommended:

* `Python CGI Adapter`_
* FastCGI_
* mod_python_
* mod_snake_
* ISAPI_ (*alpha*, for IIS)
* OneShot_ (unusual to use, sometimes buggy)


.. _`CGI Adapter`:

CGI-based Adapters
------------------

CGI-based adapters are the easiest to set up, and outside of Apache,
Xitami, and AOLServer they are pretty much the only option.

Though these are CGI-based adapters, WebKit still runs as a persistent
program with the AppServer.  The CGI adapter is a program executed by
the web server, which then contacts the AppServer and returns the
response to the web server.  Then the adapter quits, to be started
again for another request.  This starting up and stopping is what
makes CGI slow.  Because the adapter is small, this should still be
faster than a all-CGI application, because most of the work is done in
the persistent AppServer.

.. _wkcgi:

wkcgi
~~~~~

wkcgi is a CGI-based adapter written in C.  It's very small and is
good at it's one and only job of connecting to the AppServer.  While a
CGI-based adapter is the only option for some configurations, wkcgi is
not a bad compromise -- it's quite fast.  The only other adapter that
is enough faster to be interesting is mod_webkit_.  You should choose
one of these options.

On Windows systems you should find a file
``WebKit/Adapters/wkcgi/wkcgi.exe``.  You'll need to build the
executable yourself on Posix systems -- just do::

  $ cd /path/to/Webware/WebKit/Adapters/wkcgi
  $ make

There will be a file ``wkcgi``.  You may want to rename it to
``wkcgi.cgi``, since in some configurations files ending in ``.cgi``
will automatically be treated as CGI scripts.

To use the script, make sure you put it somewhere where CGI scripts
can be executed.  This may be in a ``cgi-bin`` directory, or in some
configurations it can be located anywhere so long as the filename ends
in ``.cgi`` and it's executable.  Check your error log if you are
(quickly) getting Internal Error when you try to access the script,
and for Apache see the document `Dynamic Content with CGI`__ for
configuration help.

__ http://httpd.apache.org/docs/2.0/howto/cgi.html

If you get an Internal Error after a couple seconds, you don't have
the AppServer running.  Start the AppServer (``cd WebKit;
./AppServer``) and try again.

The AppServer may also be running on a non-standard host (i.e., not
``localhost``) or a non-standard port (not 8086).  If this is the
case, you must put a file ``webkit.cfg`` in the same directory as the
wkcgi executable.  This file looks like::

    Host = localhost
    AdapterPort = 8086
    MaxConnectAttempts = 10
    ConnectRetryDelay = 1

Python CGI Adapter
~~~~~~~~~~~~~~~~~~

Though it's not recommended, there is an equivalent CGI script written
in Python.  This script is substantially slower, as it requires a
Python interpreter to be started for each request.  It is located in
``WebKit/Adapters/WebKit.cgi`` -- you may wish to point the first line
(``#!/usr/bin/env python``) to the actual path of the Python
interpreter (e.g., ``#!/usr/local/bin/python``).

Otherwise, follow the instructions for wkcgi_.  There is no
configuration, and ``WebKit.cgi`` should be able to find the host and
port of the AppServer automatically.

.. Note: If you get Internal Error, always check the AppServer is
   running.

mod_webkit
~~~~~~~~~~

This is a native Apache module designed solely to communicate with
WebKit.  It is written in C, and has been tested on Linux and
Windows.  It can only be used with Apache.

This adapter is the fastest of the adapters available for WebKit.  It
is relatively easy to install, but you probably will need
administrator or root access to the machine.

The source code and a README file describing how to configure and
build mod_webkit are located in the
``Webware/WebKit/Adapters/mod_webkit`` directory.

There are two versions, mod_webkit and mod_webkit2 -- mod_webkit2 is
for use with Apache 2.0.  The other version is for Apache 1.3.  Each
is in its own directory.

Posix Installation
^^^^^^^^^^^^^^^^^^

To install::

  $ cd /path/to/Webware/WebKit/Adapters/mod_webkit
  # or mod_webkit2 for Apache 2.0
  $ make
  $ make install

The most common error you will get in this process is an error
``make: /usr/sbin/apxs: Command not found``.  This means the
``apxs`` utility is probably located somewhere else, or you do not
have it installed.  It should be in one of these locations:

  * /usr/bin/apxs
  * /usr/local/bin/apxs
  * /usr/local/sbin/apxs
  * /usr/local/Apache-.../.../apxs

If you have an Apache directory under ``/usr/local``, you should
search it for the file.  Execute the command ``find
/usr/local/Apache... -name apxs`` to search for it.

If you cannot find it in any of these locations there is a good chance
you don't have it installed.  You should install an apache-devel
package.

Once you've found or attained the apxs utility, change the
``Makefile`` file in the mod_webkit directory.  Where it says
``APXS=/usr/sbin/apxs``, change it to the appropriate location.

``make install`` will copy the compiled module to the appropriate
location and add a line to your httpd.conf file to load the module
(but not activate it, see `Apache Configuration`_ below).

Windows Installation
^^^^^^^^^^^^^^^^^^^^

Copy ``WebKit/Adapters/mod_webkit/mod_webkit.dll`` (or the file from
``mod_webkit2`` if you are using Apache 2) into your module directory
for Apache (usually ``C:\Program Files\Apache Group\Apache\modules``).

Edit ``httpd.conf`` to include the line::

    LoadModule webkit_module modules/mod_webkit.dll

As well adding the configuration below.

Apache Configuration
^^^^^^^^^^^^^^^^^^^^

You must also add a line like this to your httpd.conf::

    <Location /WK>
        WKServer localhost 8086
        SetHandler webkit-handler
    </Location>

Some Apache 2 users have found that they must use "127.0.0.1" instead
of "localhost", since Apache 2 defaults to using ipv6 addresses first.

With these lines, any URL that starts with ``/WK/`` will be directed to the
AppServer on port 8086.  You can also use::

    AddHandler psp-handler .psp

to run PSP files that are found anywhere (similar to how PHP would
work, for example).  You still need the ``/WK`` portion to tell
mod_webkit where to find the AppServer.  This also works::

    Action py-serverpages /WK/
    AddType py-serverpages .py

which will run Python servlets from any location.

To pass additional client HTTP headers through to the AppServer,
use the ``PassHeader`` Apache directive.
For example::

    PassHeader Accept-Language

Your servlet code can access the header value like this::

    lang = self.request().environ().get('Accept-Language')

If the client request contains the header ``Accept-Language: fr``,
the above code will set ``lang`` to ``"fr"``.

.. _AOLServer:

AOLServer
~~~~~~~~~

This adapter comes with the Python-enhanced AOLserver created by the
`PyWX project`_ and is described there.

.. _`PyWX project`: http://pywx.idyll.org

.. _LRWP:
.. _`LRWP Adapter`:

LRWP Adapter (for Xitami)
~~~~~~~~~~~~~~~~~~~~~~~~~

The LRWP Adapter is meant to be used with the `Xitami web server`__.
It requires the LRWP Python library to be loaded.  We don't know
a great deal more than that.

__ http://www.xitami.com

FastCGI
~~~~~~~

In most cases FastCGI will not be significantly faster than wkcgi_
(and may be slower!), and FastCGI is considerably slower than
mod_webkit_.  At the same time it is also much more difficult to
configure.  Its use is *not* recommended.

Your web server will have to be FastCGI enabled, which you may be able
to accomplish by downloading software at http://www.FastCGI.com where
you can also learn more about FastCGI.

The top of ``WebKit/Adapters/FCGIAdapter.py`` contains a doc string
explaining its setup.

Note that to date, we have only gotten this to work on Unix.

mod_python
~~~~~~~~~~

In most cases the mod_python adapter will not be significantly faster
than wkcgi_ (and may be slower!), and the mod_python adapter is
considerably slower than mod_webkit_.  At the same time it is also
much more difficult to configure.  Its use is *not* recommended.

The top of ``WebKit/Adapters/ModPythonAdapter.py`` contains a doc
string explaining the setup.

This has been tested on both Unix and Windows.  On Windows you should
use mod_python 2.7.4 or later because there is a bug in earlier
versions of mod_python for Windows that can cause Apache to crash or
return incorrect responses under heavy load.

More information about mod_python can be found at
http://www.modpython.org.

mod_snake
~~~~~~~~~

In most cases the mod_snake adapter will not be significantly faster
than wkcgi_ (and may be slower!), and the mod_snake adapter is
considerably slower than mod_webkit_.  At the same time it is also
much more difficult to configure.  Its use is *not* recommended.

This adapter is similar to ModPython, but written for the mod_snake
apache module.  mod_snake is another method of embedding a python
interpreter into apache.  mod_snake may be preferable over mod_python
if you need to work with Apache 2.0.

A doc string is included at the top of
``WebKit/Adapters/ModSnakeAdapter.py`` which describes the
configuration steps to use this adapter.

OneShot
~~~~~~~

The OneShot adapter is another CGI based adapter, but unlike wkcgi and
WebKit.cgi, the AppServer launches, serves a response and shuts down
for every single request via OneShot.cgi.

OneShot is very slow, and has caused numerous weird errors over time.
If you use OneShot and encounter a bug, *be sure* to report that
you're using OneShot when you submit the bug.  Most of the developers
don't use OneShot anymore, and it's not as well tested as other parts
of the Webware code (and the constant starting and stopping of the
AppServer is also not well tested).

You may want to use OneShot on a commercial host where persistent
processes (like the AppServer process) are not allowed.  However, be
warned that OneShot is *very* slow.

If you use OneShot, do not launch the AppServer separately.

ISAPI
~~~~~

The ISAPI module is located in ``WebKit/Adapters/wkISAPI``.
It currently has some memory leaks and is not well tested.  It is
looking for a maintainer.  There's no documentation for it, and you
must compile it yourself.


Renaming Adapters
-----------------

Adapters such as WebKit.cgi and OneShot.cgi do not rely on their
name. Consequently, when you deploy your web site, you can rename the
adapter to something like ``serve.cgi``. This allows you to switch
adapters later without affecting the URLs and therefore the bookmarks
of your users (provided you're still using some form of CGI adapter).
mod_rewrite_ also offers several possibilities for changing names,
redirecting the root of a site to a specific context, or other URL
manipulations.  Mod_rewrite is extremely general.

.. _mod_rewrite: http://webware.colorstudy.net/twiki/bin/view/Webware/ModRewriteRecipes


Adapter Problems (not CGI)
--------------------------

There is one gotcha in setting up the adapters that don't rely on CGI.
For mod_webkit, ModPython and ModSnake, the name that you give to the
adapter location in your Apache configuration file must not actually
exist in your apache document root.  Also, you may not have a file or
directory in your document root with the same name as one of WebKit's
contexts.  So, you can't have a directory named Examples in your
document root.


Configuration
=============

In this section, we'll briefly touch on some of the configuration
options related to installing and running WebKit. A full reference to
these options can be found in the `User's Guide`__.

__ UsersGuide.html#Configuration

The settings referenced below are found in the configuration file,
``WebKit/Configs/Application.config``.


Sessions
--------

WebKit provides a Session utility class for storing data on the server
side that relates to an individual user's session with your site. The
``SessionStore`` setting determines where the data is stored and can
currently be set to ``Dynamic`` or ``File``.

Storing to the Dynamic session store is the fastest solution and is
the default. This session storage method keeps the most recently used
sessions in memory, and moves older sessions to disk periodocally. All
sessions will be moved to disk when the server is stopped.  This
storage mechanism works with both the persistant, long running
AppServers and OneShot_.  There are two settings in
``Application.config`` relating to this Session store.
``MaxDynamicMemorySessions`` specifies the maximum number of sessions
that can be in memory at any one time.  ``DynamicSessionTimeout``
specifies after what period of time sessions will be moved from memory
to file. ( Note: this setting is unrelated to the ``SessionTimeout``
setting below.  Sessions which are moved to disk by the Dynamic
Session store are not deleted).

Storing to files is provided mainly in support of the OneShot
adapter. It may also prove useful in the future in support of load
balancing. In this scenario, each individual session is stored in its
own file, loaded for every request and saved when delivering the
corresponding response.

All on-disk session information is located in WebKit/Sessions.

Also, the ``SessionTimeout`` setting lets you set the number of
minutes of inactivity before a user's session becomes invalid and is
deleted. The default is 60.  The Session Timeout value can also be
changed dynamically on a per session basis.

``Activity Log``

Three options let you control:

    * Whether or not to log activity (``LogActivity``, defaults to 0,
      i.e. off)
    * The name of the file to store the log (``ActivityLogFilename``,
      defaults to ``Logs/Activity.csv``)
    * The fields to store in the log (``ActivityLogColumns``) </ul>

See Configuration__ in the User's Guide for more information.

__ UsersGuide.html#Configuration

E-mail Errors

``EmailErrors``, ``ErrorEmailServer`` and ``ErrorEmailHeaders`` let
you configure the app server so that uncaught exceptions land in your
mailbox in real time. You should definitely set these options when
deploying a web site.

See Configuration__ in the User's Guide for more information.

__ UsersGuide.html#Configuration


Contexts
--------

WebKit divides the world into *contexts*, each of which is a directory
with its own files and servlets. WebKit will only serve files out of
its list of known contexts.

Some of the contexts you will find out of the box are ``Examples``,
``Documentation`` and ``Admin``. When viewing either an example or
admin page, you will see a sidebar that links to all the contexts.

Another way to look at contexts is a means for "directory
partitioning". If you have two distinct web applications (for example,
``PythonTutor`` and ``DayTrader``), you will likely put each of these
in their own context. In this configuration, both web applications
would be served by the same appserver instance. Note that there may
be also reasons to run multiple appserver instances for serving your
web applications. For instance, this would allow you to start and stop
them independently, run them under different users to give them
different permissions, or partition resources like number of threads
individually among the web applications.

Instead of adding your own contexts you may wish to use
MakeAppWorkDir_, which will partition your application from the
Webware installation.

To add a new context, add to the ``Contexts`` dictionary of
``Application.config``. The key is the name of the context as it
appears in the URL and the value is the path (absolute or relative to
the WebKit directory). Often the name of the context and the name of
the directory will be the same::

     'DayTrader': '/All/Web/Apps/DayTrader',

The URL to access DayTrader would then be something like:
``http://localhost/WebKit.cgi/DayTrader/``

The special name ``default`` is reserved to specify what context is
served when none is specified (as in
``http://localhost/WebKit.cgi/``). Upon installation, this is the
``Examples`` context, which is convenient during development since it
provides links to all the other contexts.

Note that a context can contain an ``__init__.py`` which will be
executed when the context is loaded at app server startup. You can put
any kind of initialization code you deem appropriate there.


.. _MakeAppWorkDir:

Creating a Working Directory
----------------------------

You can create a working directory for your applications that is
separate from the Webware installation.  To do this you will use the
script ``bin/MakeAppWorkDir.py``.  You should run it like::

    $ python Webware/bin/MakeAppWorkDir.py WorkDir

This will create a directory *WorkDir* that will contain a
directory structure for your application. Name if after your
application, place it where it is convenient for you --
it doesn't need to be located close to the Webware installation.

You have a couple of options available, e.g. for chosing the name
and location of the default context or creating additional library
directories that will be added to the Python seach path.
You can see all of these options if you run ``bin/MakeAppWorkDir.py``
without any parameters.

When you list the created directory, you will see something like this::

    404Text.txt  Cache/     ErrorMsgs/  Lib/    MyContext/  WebKit.cgi
    AppServer*   Configs/   Launch.py   Logs/   Sessions/   webkit*

Here's what the files and directories are for:

``404Text.txt``:
    The text when a page is not found (actually the HTML from <body> to
    </body>).
``AppServer``:
    The script to start up the AppServer for this application.
    Each application will have its own AppServer, and its own process.
    If you are running under Windows, you will see a ``AppServer.bat``
    instead and additionally, you will find a ``AppServerService.py``
    script that can be used to start the AppServer as a service.
``Cache``:
    A directory containing cache files. You won't need to look in here.
``Configs``:
    Configuration files for the application. These files are copied from
    ``WebKit/Configs``, but are specific to this application/AppServer.
``ErrorMsgs``:
    HTML pages for any errors that occur. These can pile up and take up
    considerable size (even just during development), so you'll want to
    purge these every so often.
``Launch.py``:
    Called by the ``AppServer`` script to launch the AppServer.
``Lib``:
    An example for an application-specific library package that can be created
    ``-l`` option (in this case, ``-l Lib``. Import modules from this directory
    like ``from Lib.SitePage import SitePage``.
``Logs``:
    Logs of accesses.
``MyContext``:
    The directory for your default context. This is where you put your servlets.
    you can change its name and location with the ```-c`` and ``-d`` options.
    You can also change this subsequently in the ``Application.config`` file
    in the ``Configs`` directory, where you can also configure more than one
    context. You may also want to remove the other standard contexts that come
    with Webware from the config file.
``Sessions``:
    Users sessions. These should be cleaned out automatically, you won't
    have to look in this directory.
``WebKit.cgi``:
    A CGI script/adapter for accessing the AppServer here. You can still use
    the other adapters, but most of them don't need to be configured for the
    individual applications. I still recommend ``mod_webkit`` or ``wkcgi``.
``webkit*``:
    If you are running under Unix, you can use this as a start script
    (see `webkit init script`_).


AppServer Notes
===============

WebKit uses a process called an AppServer to handle requests.  The
AppServer is responsible for receiving a request from the adapter, and
then running it through the Application, and then sending the response
back to the adapter.


Stopping the App Server
-----------------------

The recommended method of stopping the AppServer is through the
Application Control interface.  This is a servlet located in the Admin
context.  A username and password are required -- the username is
always ``admin``, and the password is set when you run ``install.py``.
(You can change the password through the ``WebKit/Configs/Application.config``
file).  This shutdown method is safer than doing a Control-C from a terminal,
as described below.

On all OSs, stopping the app server may also be accomplished by simply
going to its terminal/command window and hitting Control-C. The app
server is designed to intercept this interruption and shut down as
gracefully as possible. This includes saving session data to disk, if
necessary.

On Unix, a running appserver may be stopped from a terminal by typing
``./AppServer stop``.

On Windows Control-C normally shuts the app server down *gracefully*,
where as Control-Break does not. Keep that in mind and use Control-C,
unless the server is unresponsive to it.

On Unix if you don't have access to the terminal window of the app
server (perhaps because you used rlogin, telnet or ssh to remotely
access the machine), and "AppServer stop" doesn't work, you can use
``ps -ax | grep ThreadedAppServer`` to get the pid and ``kill <pid>`` to
effect a Control-C.


Reloading Servlets
------------------

As you develop your web application, you will change the code of your
various Python classes, including your servlets. The WebKit app server
will detect a change in the timestamp of a servlet's source file and
automatically reload it for you.

However, reloading fails in two areas. The first is that WebKit
doesn't check ancestor classes of servlets for modifications. So if
you modify an abstract class (for example, ``SitePage``,
``AccountPage``, etc.), it won't be reloaded. The second is that
WebKit can't check non-servlet classes. So if you modify a utility
class (for example, ``ShoppingCart``, ``Story``, etc.), it won't be
reloaded.

While developing this will happen quite often.  There is a setting in
``WebKit/Configs/AppServer.config`` that you should turn on early in
your experimentations.

The line::

  'AutoReload':      0,

in ``AppServer.config`` controls a feature where the AppServer stops
and restarts itself if any loaded modules have been changed.

You can also deal with reloading problems by stopping the app server
(Control-C in its terminal/command window) and restarting it.  And an
alternative way of reloading ancestor classes is through the
Application Control servlet, in the Admin context, which will provide
a list of all of the currently loaded modules, and allow you to reload
selected modules.  Be warned, reloading modules can cause strange
behavior, because instances of objects attached to the old class
definitions can still exist.  AutoReload is generally the best
solution.


.. _`webkit init script`:

Launching the AppServer at Unix boot up
---------------------------------------

The script ``WebKit/webkit`` is a Unix shell script launching WebKit
at boot time through the standard "init" mechanisms.

There are several variants of this script for various flavors of Unix
available in the folder ``WebKit/StartScripts``. The ``install.py``
script copies the variant that it thinks is the best fit to ``WebKit/webkit``.
If the script does not fit to your system, you may want to try out other
variants or the ``Generic`` script that should fit on most systems.

If you create a working directory using ``bin/MakeAppWorkDir.py`` as
explained above, the ``webkit`` start script will also be copied to the
working directory.

In order to start WebKit at boot time, copy this script to the system
folder that is destined for start scripts, which is usually ``/etc/init.d/``
(e.g. for SuSE or Debian Linux or Solaris) or ``/etc/rc.d/init.d/`` (e.g. for
RedHat or Mandrake Linux). Instead of copying the script, you can also make
a symbolic link refering to the script located in your working directory.
If you do this, the script will be able to determine the location of the
working directory from the symbolic link and you do not have to set the
location in the script itself.

Start script configuration
~~~~~~~~~~~~~~~~~~~~~~~~~~

At the top of the start script, you will find a configuration section where
you can change several variables that influence the start-up process.
The main configuration parameters are the following::

    WORK_DIR      the location of your working directory

    LOG_FILE      the location of the log file which records the standard
                  and error output of the application server

    PID_FILE      the location of the pid file which records the process id
                  of the Python application server

    WEBWARE_USER  the user to run the application server

Note that the pid file records the pid of the Python application server, not
the pid of the wrapper script ``AppServer`` which is responsible for the
AutoReload mechanism.

For security reasons, you shouldn't use ``root`` as the Webware user, but
a user with the least possible permissions, maybe even ``nobody``. By
default, the start script uses the owner of the ``AppServer`` script.

For the log file and the pid file, you may either use the standard locations
on your system, usually something like ``/var/log/webkit.log`` and
``/var/log/webkit.pid`` (use different names for different instances),
or you may store them in the working directory and its ``Logs`` subdirectory.
In the first case, the files should be written as the root user, because
other users usually won't have writing permission for the standard locations.
In the second case, the files should be written as the Webware user, so
you won't need to be ``root`` to restart the application server.
Therefore, the configuration section has another variable ``LAUNCH_AS_WEBWARE``
that determines whether Webware will launch as ``root`` and then
(after writing the pid and log files) switch to the Webware user, or whether
Webware will immediately launch and write both files as the Webware user.

By default, the script will start as the Webware user and will write the files
to the working directory, so you have to unset ``LAUNCH_AS_WEBWARE`` if you
want to use the standard system locations for the files instead.

The start script also passes the variable ``PYTHONOPTS`` to the ``AppServer``
script. You can add options ``-U`` for unbuffered output (to the log file)
or ``-O`` if you want to use optimized Python files (i.e. ``.pyo`` instead
of ``.pyc``). You can also add additional Python libraries with ``PYTHONPATH``.

Activating the start script
~~~~~~~~~~~~~~~~~~~~~~~~~~~

First try whether your start script works::

    > ./webkit start

The WebKit application server should now be launched and you should see
it in the output of the ``ps`` command.

Also try to stop WebKit by typing::

    > ./webkit stop

To activate the script for future boots, you still have to put symbolic links
to the runlevel directories in which you want to launch WebKit.
On some systems, you have to do this manually. For example, if the start script
is ``/etc/init.d/webkit``, you would create the symbolic links like that::

    > cd /etc/rc0.d
    > ln -s ../init.d/webkit K75webkit
    (repeat for rc1.d and rc6.d)
    > cd /etc/rc2.d
    > ln -s ../init.d/webkit S25webkit
    (repeat for rc3.d, rc4.d, and rc5.d)


Some systems also provide a command line tool for this purpose, which will
depend on the flavor of Unix you are using. For instance, you will use
``insserv`` on SuSE Linux, ``chkconfig`` for RedHat (Fedora),
``update-rc.d`` for Debian (Ubuntu) or ``rc-update`` for Gentoo.

Take care to launch the script after your web server and database and other
services you are using. You can do this by using appropriate numbers for the
symbolic links or setting approriate hints for the command line tools at
the top of the script.

See the corresponding ``man`` pages or administrator handbook of your Unix
system for the details of installing start scripts.


Running ThreadedAppServer as a Windows NT/2K/XP Service
-------------------------------------------------------

``AppServerService`` is a script that runs the ``ThreadedAppServer``
as a Windows NT Service.  This means it can be started and stopped
from the Control Panel or from the command line using ``net start``
and ``net stop``, and it can be configured in the Control Panel
to auto-start when the machine boots.  This is the preferred way
to deploy WebKit on a Windows NT/2K/XP platform.

``AppServerService`` requires the Python win32all__ extensions to
have been installed.

__ http://www.python.org/windows/win32all/

To see the options for installing, removing, starting, and stopping
the service, just run ``AppServerService.py`` with no arguments.
Typical usage is to install the service to run under a particular
user account and startup automatically on reboot with::

    > python AppServerService.py ^
      --username mydomain\myusername ^
      --password mypassword --startup auto install

(Note: The caret (^) is the line continuation character under Windows.)

Then, you can start the service from the Services applet in the
Control Panel, where it will be listed as "WebKit Application Server".
Or, from the command line, it can be started with either of
the following commands::

    > net start WebKit
    > python AppServerService.py start

The service can be stopped from the Control Panel or with::

    > net stop WebKit
    > python AppServerService.py stop

And finally, to uninstall the service, stop it and then run::

    > python AppServerService.py remove


Other Notes
-----------

See `Stopping the App Server`_ and `Reloading Servlets`_ above in
Adapters_.


Troubleshooting
===============


Bad Marshal Data
----------------

The most common installation problem is a Python exception appearing
in your browser that says "bad marshal data". This is always caused by
pointing the web browser to the app server:

  http://localhost:8086/WebKit.cgi/

But the app server hides behind a web server so the correct URL
would be:

  http://localhost/WebKit.cgi/

That requires that web server and app server are set up to talk to
each other. And that's what the next section is all about...
