cmor_version: 2.5.0   ! minimum version of CMOR that can read this table
cf_version:   1.4     ! version of CF that output conforms to
project_id:   CCMI1   ! project id
table_id:     daily   ! table id
table_date:   8 November 2013 ! date this table was constructed  
modeling_realm: atmos
frequency: day

expt_id_ok:  'CCMI_Historical' 'refC1'
expt_id_ok:  'CCMI_HistoricalSD' 'refC1sd'
expt_id_ok:  'CCMI_Projection' 'refC2'
expt_id_ok:  'CCMI_HistorSc_Emis' 'senC1Emis'
expt_id_ok:  'CCMI_HistorSc_EmisSD' 'senC1SDEmis'
expt_id_ok:  'CCMI_HistorSc_fEmis' 'senC1fEmis'
expt_id_ok:  'CCMI_HistorSc_fEmisSD' 'senC1SDfEmis'
expt_id_ok:  'CCMI_HistorSc_SSI' 'senC1SSI'
expt_id_ok:  'CCMI_ProjecSC_RCP2.6' 'senC2rcp26'
expt_id_ok:  'CCMI_ProjecSC_RCP4.5' 'senC2rcp45'
expt_id_ok:  'CCMI_ProjecSC_RCP8.5' 'senC2rcp85'
expt_id_ok:  'CCMI_ProjecSC_fODS' 'senC2fODS'
expt_id_ok:  'CCMI_ProjecSC_fODS2000' 'senC2fODS2000'
expt_id_ok:  'CCMI_ProjecSC_fGHG' 'senC2fGHG'
expt_id_ok:  'CCMI_ProjecSC_fEMIS' 'senC2fEMIS'
expt_id_ok:  'CCMI_ProjecSC_GeoM_G1' 'senC2GeoMIPG1'
expt_id_ok:  'CCMI_ProjecSC_GeoM_G2' 'senC2GeoMIPG2'
expt_id_ok:  'CCMI_ProjecSC_GeoM_G3' 'senC2GeoMIPG3'
expt_id_ok:  'CCMI_ProjecSC_GeoM_G4' 'senC2GeoMIPG4'
expt_id_ok:  'CCMI_ProjecSC_SolarTrend' 'senC2slrtrend'

approx_interval:  1.000   ! approximate spacing between successive time
                          !   samples (in units of the output time 
                          !   coordinate)

missing_value: 1.e20      ! value used to indicate a missing value
                          !   in arrays output by netCDF as 32-bit IEEE 
                          !   floating-point numbers (float or real)

baseURL: http://www.met.reading.ac.uk/ccmi/   
product: output

required_global_attributes: creation_date tracking_id forcing model_id parent_experiment_id parent_experiment_rip branch_time contact institute_id ! space separated required global attribute 

generic_levels:   alevel alev1

!============
axis_entry: longitude
!============
!----------------------------------
! Axis attributes:
!----------------------------------
standard_name:    longitude
units:            degrees_east
axis:             X             ! X, Y, Z, T (default: undeclared)
long_name:        longitude
!----------------------------------
! Additional axis information:
!----------------------------------
out_name:         lon
valid_min:        0.0         
valid_max:        360.0 
stored_direction: increasing
type:             double
must_have_bounds: yes
!----------------------------------
!


!============
axis_entry: latitude
!============
!----------------------------------
! Axis attributes:
!----------------------------------
standard_name:    latitude
units:            degrees_north
axis:             Y             ! X, Y, Z, T (default: undeclared)
long_name:        latitude
!----------------------------------
! Additional axis information:
!----------------------------------
out_name:         lat
valid_min:        -90.0         
valid_max:        90.0 
stored_direction: increasing
type:             double
must_have_bounds: yes
!----------------------------------
!

!============
axis_entry: plevs
!============
!----------------------------------
! Axis attributes:
!----------------------------------
standard_name:    air_pressure
units:            Pa
axis:             Z             ! X, Y, Z, T (default: undeclared)
positive:         down         ! up or down (default: undeclared)
long_name:        pressure
!----------------------------------
! Additional axis information:
!----------------------------------
out_name:         plev
stored_direction: decreasing
tolerance:        0.001
type:             double
requested:        100000. 85000. 70000. 50000. 40000. 30000. 25000. 20000. 17000. 15000. 13000. 11500. 10000. 9000. 8000. 7000. 5000. 3000. 2000. 1500. 1000. 700. 500. 300. 200. 150. 100. 50. 30. 20. 10.       ! space-separated list of requested coordinates 
must_have_bounds: no
!----------------------------------
!

!============
axis_entry: pr5
!============
!----------------------------------
! Axis attributes:
!----------------------------------
standard_name:    air_pressure
units:            Pa
axis:             Z             ! X, Y, Z, T (default: undeclared)
positive:         down         ! up or down (default: undeclared)
long_name:        pressure
!----------------------------------
! Additional axis information:
!----------------------------------
out_name:         plev
stored_direction: decreasing
tolerance:        0.001
type:             double
value:            500.           ! of scalar (singleton) dimension 
must_have_bounds: no
!----------------------------------
!

!============
axis_entry: pr10
!============
!----------------------------------
! Axis attributes:
!----------------------------------
standard_name:    air_pressure
units:            Pa
axis:             Z             ! X, Y, Z, T (default: undeclared)
positive:         down         ! up or down (default: undeclared)
long_name:        pressure
!----------------------------------
! Additional axis information:
!----------------------------------
out_name:         plev
stored_direction: decreasing
tolerance:        0.001
type:             double
value:            1000.          ! of scalar (singleton) dimension 
must_have_bounds: no
!----------------------------------
!

!============
axis_entry: pr30
!============
!----------------------------------
! Axis attributes:
!----------------------------------
standard_name:    air_pressure
units:            Pa
axis:             Z             ! X, Y, Z, T (default: undeclared)
positive:         down         ! up or down (default: undeclared)
long_name:        pressure
!----------------------------------
! Additional axis information:
!----------------------------------
out_name:         plev
stored_direction: decreasing
tolerance:        0.001
type:             double
value:            3000.          ! of scalar (singleton) dimension 
must_have_bounds: no
!----------------------------------
!

!============
axis_entry: pr40
!============
!----------------------------------
! Axis attributes:
!----------------------------------
standard_name:    air_pressure
units:            Pa
axis:             Z             ! X, Y, Z, T (default: undeclared)
positive:         down         ! up or down (default: undeclared)
long_name:        pressure
!----------------------------------
! Additional axis information:
!----------------------------------
out_name:         plev
stored_direction: decreasing
tolerance:        0.001
type:             double
value:            4000.          ! of scalar (singleton) dimension 
must_have_bounds: no
!----------------------------------
!

!============
axis_entry: pr50
!============
!----------------------------------
! Axis attributes:
!----------------------------------
standard_name:    air_pressure
units:            Pa
axis:             Z             ! X, Y, Z, T (default: undeclared)
positive:         down         ! up or down (default: undeclared)
long_name:        pressure
!----------------------------------
! Additional axis information:
!----------------------------------
out_name:         plev
stored_direction: decreasing
tolerance:        0.001
type:             double
value:            5000.          ! of scalar (singleton) dimension 
must_have_bounds: no
!----------------------------------
!

!============
axis_entry: pr70
!============
!----------------------------------
! Axis attributes:
!----------------------------------
standard_name:    air_pressure
units:            Pa
axis:             Z             ! X, Y, Z, T (default: undeclared)
positive:         down         ! up or down (default: undeclared)
long_name:        pressure
!----------------------------------
! Additional axis information:
!----------------------------------
out_name:         plev
stored_direction: decreasing
tolerance:        0.001
type:             double
value:            7000.          ! of scalar (singleton) dimension 
must_have_bounds: no
!----------------------------------
!

!============
axis_entry: pr100
!============
!----------------------------------
! Axis attributes:
!----------------------------------
standard_name:    air_pressure
units:            Pa
axis:             Z             ! X, Y, Z, T (default: undeclared)
positive:         down         ! up or down (default: undeclared)
long_name:        pressure
!----------------------------------
! Additional axis information:
!----------------------------------
out_name:         plev
stored_direction: decreasing
tolerance:        0.001
type:             double
value:            10000.         ! of scalar (singleton) dimension 
must_have_bounds: no
!----------------------------------
!

!============
axis_entry: pr500
!============
!----------------------------------
! Axis attributes:
!----------------------------------
standard_name:    air_pressure
units:            Pa
axis:             Z             ! X, Y, Z, T (default: undeclared)
positive:         down         ! up or down (default: undeclared)
long_name:        pressure
!----------------------------------
! Additional axis information:
!----------------------------------
out_name:         plev
stored_direction: decreasing
tolerance:        0.001
type:             double
value:            50000.         ! of scalar (singleton) dimension 
must_have_bounds: no
!----------------------------------
!

!============
axis_entry: pr700
!============
!----------------------------------
! Axis attributes:
!----------------------------------
standard_name:    air_pressure
units:            Pa
axis:             Z             ! X, Y, Z, T (default: undeclared)
positive:         down         ! up or down (default: undeclared)
long_name:        pressure
!----------------------------------
! Additional axis information:
!----------------------------------
out_name:         plev
stored_direction: decreasing
tolerance:        0.001
type:             double
value:            70000.          ! of scalar (singleton) dimension 
must_have_bounds: no
!----------------------------------
!

!============
axis_entry: pr850
!============
!----------------------------------
! Axis attributes:
!----------------------------------
standard_name:    air_pressure
units:            Pa
axis:             Z             ! X, Y, Z, T (default: undeclared)
positive:         down         ! up or down (default: undeclared)
long_name:        pressure
!----------------------------------
! Additional axis information:
!----------------------------------
out_name:         plev
stored_direction: decreasing
tolerance:        0.001
type:             double
value:            85000.         ! of scalar (singleton) dimension 
must_have_bounds: no
!----------------------------------
!

!============
axis_entry: pr1000
!============
!----------------------------------
! Axis attributes:
!----------------------------------
standard_name:    air_pressure
units:            Pa
axis:             Z             ! X, Y, Z, T (default: undeclared)
positive:         down         ! up or down (default: undeclared)
long_name:        pressure
!----------------------------------
! Additional axis information:
!----------------------------------
out_name:         plev
stored_direction: decreasing
tolerance:        0.001
type:             double
value:            100000.        ! of scalar (singleton) dimension 
must_have_bounds: no
!----------------------------------
!

!============
axis_entry: height2m
!============
!----------------------------------
! Axis attributes:
!----------------------------------
standard_name:    height
units:            m
axis:             Z             ! X, Y, Z, T (default: undeclared)
positive:         up         ! up or down (default: undeclared)
long_name:        height
!----------------------------------
! Additional axis information:
!----------------------------------
out_name:         height
valid_min:        1.0         
valid_max:        10.0 
stored_direction: increasing
type:             double
value:            2.            ! of scalar (singleton) dimension 
must_have_bounds: no
!----------------------------------
!

!============
axis_entry: pot840
!============
!----------------------------------
! Axis attributes:
!----------------------------------
standard_name:    air_potential_temperature
units:            K
axis:             Z             ! X, Y, Z, T (default: undeclared)
positive:         up         ! up or down (default: undeclared)
long_name:        Potential Temperature
!----------------------------------
! Additional axis information:
!----------------------------------
out_name:         potemp
valid_min:        800.0
valid_max:        880.0
stored_direction: increasing
type:             double
value:            840.0         ! of scalar (singleton) dimension 
must_have_bounds: no
!----------------------------------
!

!============
axis_entry: pot480
!============
!----------------------------------
! Axis attributes:
!----------------------------------
standard_name:    air_potential_temperature
units:            K
axis:             Z             ! X, Y, Z, T (default: undeclared)
positive:         up         ! up or down (default: undeclared)
long_name:        Potential Temperature
!----------------------------------
! Additional axis information:
!----------------------------------
out_name:         potemp
valid_min:        440.0
valid_max:        520.0
stored_direction: increasing
type:             double
value:            480.0         ! of scalar (singleton) dimension 
must_have_bounds: no
!----------------------------------
!

!============
axis_entry: time
!============
!----------------------------------
! Axis attributes:
!----------------------------------
standard_name:    time
units:            days since ?
axis:             T             ! X, Y, Z, T (default: undeclared)
long_name:        time
!----------------------------------
! Additional axis information:
!----------------------------------
out_name:         time
stored_direction: increasing
type:             double
must_have_bounds: yes
!----------------------------------
!

!============
axis_entry: smooth_level
!============
!
! This coordinate is a hybrid height coordinate with units of meters (m).
!  It increases upward.
!  The values of a(k)*ztop, which appear in the formula below, should be stored as smooth_level. 
!  Note that in the netCDF file the variable will be named "lev", not smooth_level.
!
!------------
!
! Axis attributes:
!----------------------------------	
standard_name:    atmosphere_sleve_coordinate
units:            m
axis:             Z
positive:	      up
long_name:        atmosphere smooth level vertical (SLEVE) coordinate
!----------------------------------	
!
! Additional axis information:
!----------------------------------	
out_name:         lev
must_have_bounds: yes
stored_direction: increasing
valid_min:        -200.
valid_max:        800000.
formula:          z(n,k,j,i) = a(k)*ztop + b1(k)*zsurf1(n,j,i) + b2(k)*zsurf2(n,j,i)
z_factors:        a: a b1: b1 b2: b2 ztop: ztop zsurf1: zsurf1 zsurf2: zsurf2
z_bounds_factors: a: a_bnds b1: b1_bnds b2: b2_bnds ztop: ztop zsurf1: zsurf1 zsurf2: zsurf2
!----------------------------------	
!
!============
axis_entry: natural_log_pressure
!============
!
!This coordinate is dimensionless and varies from near 0 at the surface and increases upward.
!  The values of lev(k), which appears in the formula below, should be stored as natural_log_pressure.  
!  Note that in the netCDF file the variable will be named "lev", not natural_log_pressure.
!
!------------
!
! Axis attributes:
!----------------------------------	
standard_name:    atmosphere_ln_pressure_coordinate
axis:             Z
long_name:        atmosphere natural log pressure coordinate
positive:	      down
!----------------------------------	
!
! Additional axis information:
!----------------------------------	
out_name:         lev
must_have_bounds: yes
stored_direction: decreasing
valid_min:        -1.
valid_max:        20.
formula:          p(k) = p0 * exp(-lev(k))
z_factors:        p0: p0 lev: lev
z_bounds_factors: p0: p0 lev: lev_bnds
!----------------------------------	
!
!============
axis_entry: standard_sigma
!============
!
! This coordinate is dimensionless and varies from 0 at the model top to 1.0 at the surface.
!  The values of sigma(k), which appears in the formula below, should be stored as standard_sigma.  
!  Note that in the netCDF file the variable will be named "lev", not standard_sigma.
!
!------------
!
! Axis attributes:
!----------------------------------	
standard_name:    atmosphere_sigma_coordinate
axis:             Z
positive:         down
long_name:        sigma coordinate
!----------------------------------	
!
! Additional axis information:
!----------------------------------	
out_name:         lev
must_have_bounds: yes
stored_direction: decreasing
valid_min:        0.0
valid_max:        1.0
formula:          p(n,k,j,i) = ptop + sigma(k)*(ps(n,j,i) - ptop)
z_factors:        ptop: ptop sigma: lev ps: ps
z_bounds_factors: ptop: ptop sigma: lev_bnds ps: ps
!----------------------------------	
!
!
!============
axis_entry:  standard_hybrid_sigma
!============
!
! This coordinate is dimensionless and varies from a small value at the model top to 1.0 at the surface.
!  The values of a(k)+ b(k), which appear in the formula below, should be stored as standard_hybrid_sigma.  
!  Note that in the netCDF file the variable will be named "lev", not standard_hybrid_sigma.
!
!---------------------------------
! Axis attributes:
!----------------------------------	
standard_name:    atmosphere_hybrid_sigma_pressure_coordinate
units:            1
axis:             Z 
positive:         down
long_name:        hybrid sigma pressure coordinate
!----------------------------------
! Additional axis information:
!----------------------------------	
out_name:         lev
must_have_bounds: yes
stored_direction: decreasing
valid_min:        0.0
valid_max:        1.0
formula:          p(n,k,j,i) = a(k)*p0 + b(k)*ps(n,j,i)
z_factors:        p0: p0 a: a b: b ps: ps
z_bounds_factors: p0: p0 a: a_bnds b: b_bnds ps: ps
!----------------------------------		
!
!
!============
axis_entry:  alternate_hybrid_sigma
!============
!
! This coordinate is dimensionless and varies from a small value at the model top to 1.0 at the surface.
!  The values of ap(k)/p0 + b(k), which appear in the formula below, should be stored as alternate_hybrid_sigma.  
!  Note that in the netCDF file the variable will be named "lev", not alternate_hybrid_sigma.
!
!------------
!
! Axis attributes:
!----------------------------------	
standard_name:    atmosphere_hybrid_sigma_pressure_coordinate
units:            1
axis:             Z
positive:         down
long_name:        hybrid sigma pressure coordinate
!----------------------------------	
!
! Additional axis information:
!----------------------------------	
out_name:         lev
must_have_bounds: yes
stored_direction: decreasing
valid_min:        0.0
valid_max:        1.0
formula:          p(n,k,j,i) = ap(k) + b(k)*ps(n,j,i)
z_factors:        ap: ap b: b ps: ps
z_bounds_factors: ap: ap_bnds b: b_bnds ps: ps
!----------------------------------		
!
!
!============
axis_entry:  hybrid_height
!============
!
! This coordinate has dimension of meters (m) and increases upward.
!  The values of a(k) which appear in the formula below, should be stored as hybrid_height.  
!  Note that in the netCDF file the variable will be named "lev", not hybrid_height.
!
!------------
!
! Axis attributes:
!----------------------------------	
standard_name:    atmosphere_hybrid_height_coordinate
units:            m
axis:             Z 
positive:         up
long_name:        hybrid height coordinate
!----------------------------------	
!
! Additional axis information:
!----------------------------------	
out_name:         lev
must_have_bounds: yes
stored_direction: increasing
valid_min:        0.0
formula:          z(k,j,i) = a(k) + b(k)*orog(j,i)
z_factors:        a: lev b: b orog: orog
z_bounds_factors: a: lev_bnds b: b_bnds orog: orog
!----------------------------------		
!
! ***************************************************************
!
! Vertical coordinate formula terms:
!
! ***************************************************************
!
!
!============
variable_entry:    orog
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     surface_altitude
units:             m
long_name:         Surface Altitude
comment:           height above the geoid; as defined here, ""the geoid"" is a surface of constant geopotential that, if the ocean were at rest, would coincide with mean sea level. Under this definition, the geoid changes as the mean volume of the ocean changes (e.g., due to glacial melt, or global warming of the ocean).  Report here the height above the present-day geoid.  Over ocean, report as 0.0
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude
out_name:          orog
type:              real
valid_min:         -700
valid_max:         1.00E+04
!----------------------------------
!
!
!============
variable_entry: p0
!============
!------------
!
! Variable attributes:
!----------------------------------	
long_name:       vertical coordinate formula term: reference pressure 
units:           Pa
!----------------------------------	
!
!
!============
variable_entry: ptop
!============
!
!------------
!
! Variable attributes:
!----------------------------------	
long_name:       pressure at top of model 
units:           Pa
!----------------------------------	
!
!
!
!============
variable_entry: a
!============
!------------
!
! Variable attributes:
!----------------------------------	
long_name:   vertical coordinate formula term: a(k)
units:        1
!----------------------------------	
!
! Additional variable information:
!----------------------------------	
dimensions:         alevel
type:               double
!----------------------------------	
!
!
!============
variable_entry: b
!============
!------------
!
! Variable attributes:
!----------------------------------	
long_name:   vertical coordinate formula term: b(k)
units:        1
!----------------------------------	
!
! Additional variable information:
!----------------------------------	
dimensions:         alevel
type:               double
!----------------------------------	
!
!
!============
variable_entry: a_bnds
!============
!
!------------
!
! Variable attributes:
!----------------------------------	
long_name:   vertical coordinate formula term: a(k+1/2)
units:        1
!----------------------------------	
!
! Additional variable information:
!----------------------------------	
dimensions:         alevel
type:               double
!----------------------------------	
!
!
!============
variable_entry: b_bnds
!============
!
!------------
!
! Variable attributes:
!----------------------------------	
long_name:   vertical coordinate formula term: b(k+1/2)
units:        1
!----------------------------------	
!
! Additional variable information:
!----------------------------------	
dimensions:         alevel
type:               double
!----------------------------------
!
!
!============
variable_entry: ap
!============
!
! Variable attributes:
!----------------------------------	
long_name:   vertical coordinate formula term: ap(k)
units:           Pa
!----------------------------------	
!
! Additional variable information:
!----------------------------------	
dimensions:         alevel
type:               double
!----------------------------------	
!
!
!============
variable_entry: ap_bnds
!============
!
! Variable attributes:
!----------------------------------	
long_name:   vertical coordinate formula term: ap(k+1/2)
units:           Pa
!----------------------------------	
!
! Additional variable information:
!----------------------------------	
dimensions:         alevel
type:               double
!----------------------------------	
!
!
!============
variable_entry: ztop
!============
!
!------------
!
! Variable attributes:
!----------------------------------	
long_name:       height of top of model 
units:           m
!----------------------------------	
!
!
! ------- Requested CCMI time variables
!
!
!============
variable_entry: ccmi_year
!============
!------------
!
! Variable attributes:
!----------------------------------
long_name:       CCMI Year
comment:         These are what each model believes the date/time (Gregorian calendar) to be at the middle of each time interval in the output (GMT, not local time).
units:           year
dimensions:      time
type:            integer
!----------------------------------
!
!
!============
variable_entry: ccmi_month
!============
!------------
!
! Variable attributes:
!----------------------------------
long_name:       CCMI Month
comment:         These are what each model believes the date/time (Gregorian calendar) to be at the middle of each time interval in the output (GMT, not local time).
units:           month
dimensions:      time
type:            integer
!----------------------------------
!
!
!============
variable_entry: ccmi_day
!============
!------------
!
! Variable attributes:
!----------------------------------
long_name:       CCMI Day
comment:         These are what each model believes the date/time (Gregorian calendar) to be at the middle of each time interval in the output (GMT, not local time).
units:           day
dimensions:      time
type:            integer
!----------------------------------
!
!
!============
variable_entry: ccmi_hour
!============
!------------
!
! Variable attributes:
!----------------------------------
long_name:       CCMI Hour
comment:         These are what each model believes the date/time (Gregorian calendar) to be at the middle of each time interval in the output (GMT, not local time).
units:           hour
dimensions:      time
type:            integer
!----------------------------------
!
!
!============
variable_entry: ccmi_minute
!============
!------------
!
! Variable attributes:
!----------------------------------
long_name:       CCMI Minute
comment:         These are what each model believes the date/time (Gregorian calendar) to be at the middle of each time interval in the output (GMT, not local time).
units:           minute
dimensions:      time
type:            integer
!----------------------------------
!
!============
variable_entry:    ps
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     surface_air_pressure
units:             Pa
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Surface Air Pressure
comment:           surface pressure (not mean sea-level pressure), 2-D field to calculate the 3-D pressure field from hybrid coordinates
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time
type:              real
valid_min:         0.0
valid_max:         1000000.0
!----------------------------------
!

!============
variable_entry:    ua10
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     eastward_wind
units:             m s-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Eastward Wind at 10 hPa
comment:           Zonal wind on the 10 hPa surface
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time pr10
type:              real
valid_min:         -1000.0
valid_max:         1000.0
!----------------------------------
!

!============
variable_entry:    ua100
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     eastward_wind
units:             m s-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Eastward Wind at 100 hPa
comment:           Zonal wind on the 100 hPa surface
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time pr100
type:              real
valid_min:         -1000.0
valid_max:         1000.0
!----------------------------------
!

!============
variable_entry:    ua500
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     eastward_wind
units:             m s-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Eastward Wind at 500 hPa
comment:           Zonal wind on the 500 hPa surface
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time pr500
type:              real
valid_min:         -1000.0
valid_max:         1000.0
!----------------------------------
!

!============
variable_entry:    ua850
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     eastward_wind
units:             m s-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Eastward Wind at 850 hPa
comment:           Zonal wind on the 850 hPa surface
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time pr850
type:              real
valid_min:         -1000.0
valid_max:         1000.0
!----------------------------------
!

!============
variable_entry:    ua1000
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     eastward_wind
units:             m s-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Eastward Wind at 1000 hPa
comment:           Zonal wind on the 1000 hPa surface
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time pr1000
type:              real
valid_min:         -1000.0
valid_max:         1000.0
!----------------------------------
!

!============
variable_entry:    va10
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     northward_wind
units:             m s-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Northward Wind at 10 hPa
comment:           Meridional wind on the 10 hPa surface
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time pr10
type:              real
valid_min:         -1000.0
valid_max:         1000.0
!----------------------------------
!

!============
variable_entry:    va50
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     northward_wind
units:             m s-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Northward Wind at 50 hPa
comment:           Meridional wind on the 50 hPa surface
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time pr50
type:              real
valid_min:         -1000.0
valid_max:         1000.0
!----------------------------------
!

!============
variable_entry:    va100
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     northward_wind
units:             m s-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Northward Wind at 100 hPa
comment:           Meridional wind on the 100 hPa surface
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time pr100
type:              real
valid_min:         -1000.0
valid_max:         1000.0
!----------------------------------
!

!============
variable_entry:    va500
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     northward_wind
units:             m s-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Northward Wind at 500 hPa
comment:           Meridional wind on the 500 hPa surface
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time pr500
type:              real
valid_min:         -1000.0
valid_max:         1000.0
!----------------------------------
!

!============
variable_entry:    va1000
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     northward_wind
units:             m s-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Northward Wind at 1000 hPa
comment:           Meridional wind on the 1000 hPa surface
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time pr1000
type:              real
valid_min:         -1000.0
valid_max:         1000.0
!----------------------------------
!

!============
variable_entry:    wa50
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     upward_air_velocity
units:             m s-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Upward Wind at 50 hPa
comment:           Upward wind on the 50 hPa surface
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time pr50
type:              real
valid_min:         -1000.0
valid_max:         1000.0
!----------------------------------
!

!============
variable_entry:    ta5
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     air_temperature
units:             K
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Air Temperature at 5 hPa
comment:           Temperature on the 5 hPa surface
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time pr5
type:              real
valid_min:         0.0
valid_max:         1000.0
!----------------------------------
!

!============
variable_entry:    ta10
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     air_temperature
units:             K
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Air Temperature at 10 hPa
comment:           Temperature on the 10 hPa surface
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time pr10
type:              real
valid_min:         0.0
valid_max:         1000.0
!----------------------------------
!

!============
variable_entry:    ta30
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     air_temperature
units:             K
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Air Temperature at 30 hPa
comment:           Temperature on the 30 hPa surface
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time pr30
type:              real
valid_min:         0.0
valid_max:         1000.0
!----------------------------------
!

!============
variable_entry:    ta40
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     air_temperature
units:             K
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Air Temperature at 40 hPa
comment:           Temperature on the 40 hPa surface
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time pr40
type:              real
valid_min:         0.0
valid_max:         1000.0
!----------------------------------
!

!============
variable_entry:    ta50
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     air_temperature
units:             K
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Air Temperature at 50 hPa
comment:           Temperature on the 50 hPa surface
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time pr50
type:              real
valid_min:         0.0
valid_max:         1000.0
!----------------------------------
!

!============
variable_entry:    ta70
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     air_temperature
units:             K
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Air Temperature at 70 hPa
comment:           Temperature on the 70 hPa surface
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time pr70
type:              real
valid_min:         0.0
valid_max:         1000.0
!----------------------------------
!

!============
variable_entry:    ta100
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     air_temperature
units:             K
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Air Temperature at 100 hPa
comment:           Temperature on the 100 hPa surface
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time pr100
type:              real
valid_min:         0.0
valid_max:         1000.0
!----------------------------------
!

!============
variable_entry:    ta1000
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     air_temperature
units:             K
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Air Temperature at 1000 hPa
comment:           Temperature on the 1000 hPa surface
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time pr1000
type:              real
valid_min:         0.0
valid_max:         1000.0
!----------------------------------
!

!============
variable_entry:    tas
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     air_temperature
units:             K
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Near-Surface Air Temperature
comment:           near-surface (usually, 2 meter) air temperature
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time height2m
type:              real
valid_min:         0.0
valid_max:         1000.0
!----------------------------------
!

!============
variable_entry:    sfta
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     surface_temperature
units:             K
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Surface Temperature
comment:           Temperature at surface
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time
type:              real
valid_min:         0.0
valid_max:         1000.0
!----------------------------------
!

!============
variable_entry:    zg10
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     geopotential_height
units:             m
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Geopotential Height at 10 hPa
comment:           Geopotential height on the 10 hPa surface
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time pr10
type:              real
valid_min:         10000.0
valid_max:         50000.0
!----------------------------------
!

!============
variable_entry:    zg100
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     geopotential_height
units:             m
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Geopotential Height at 100 hPa
comment:           Geopotential height on the 100 hPa surface
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time pr100
type:              real
valid_min:         0.0
valid_max:         40000.0
!----------------------------------
!

!============
variable_entry:    zg500
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     geopotential_height
units:             m
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Geopotential Height at 500 hPa
comment:           geopotential height on the 500 hPa surface
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time pr500
type:              real
valid_min:         0.0
valid_max:         20000.0
!----------------------------------
!

!============
variable_entry:    zg1000
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     geopotential_height
units:             m
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Geopotential Height at 1000 hPa
comment:           Geopotential height on the 1000 hPa surface
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time pr1000
type:              real
valid_min:         -1000.0
valid_max:         10000.0
!----------------------------------
!

!============
variable_entry:    vorpot840
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     ertel_potential_vorticity
units:             K m2 kg-1 s-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Potential Vorticity on 840K
comment:           potential vorticity at 840 K
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time pot840
type:              real
valid_min:         -1000.0
valid_max:         1000.0
!----------------------------------
!

!============
variable_entry:    vorpot480
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     ertel_potential_vorticity
units:             K m2 kg-1 s-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Potential Vorticity on 480K
comment:           potential vorticity at 480 K
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time pot480
type:              real
valid_min:         -1000.0
valid_max:         1000.0
!----------------------------------
!

!============
variable_entry:    dytoz
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     equivalent_thickness_at_stp_of_atmosphere_ozone_content
units:             DU
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Total Column Ozone
comment:           total ozone column in DU
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time
type:              real
valid_min:         0.0
valid_max:         5000.0
!----------------------------------
!

!============
variable_entry:    dyrsds
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     surface_downwelling_shortwave_flux_in_air
units:             W m-2
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Surface Downwelling Shortwave Radiation
comment:           surface solar irradiance for UV calculations
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time
type:              real
positive:          down
valid_min:         -0.1
valid_max:         10000.0
!----------------------------------
!

!============
variable_entry:    dyrsdscs
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     surface_downwelling_shortwave_flux_in_air_assuming_clear_sky
units:             W m-2
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Surface Downwelling Clear-Sky Shortwave Radiation
comment:           surface solar irradiance clear sky for UV calculations
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time
type:              real
positive:          down
valid_min:         -0.1
valid_max:         10000.0
!----------------------------------
!

!============
variable_entry:    dyrlut
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     toa_outgoing_longwave_flux
units:             W m-2
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         TOA Outgoing Longwave Radiation
comment:           outgoing longwave irradiance
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time
type:              real
positive:          up
valid_min:         -0.1
valid_max:         10000.0
!----------------------------------
!

!============
variable_entry:    snd
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     surface_snow_thickness
units:             m
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Snow Depth
comment:           snow depth
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time
type:              real
valid_min:         0.0
valid_max:         1000.0
!----------------------------------
!

!============
variable_entry:    snw
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     surface_snow_amount
units:             kg m-2
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Surface Snow Amount
comment:           Compute as the mass of surface snow on the land portion of the grid cell divided by the land area in the grid cell; report 0.0 where the land fraction is 0; exclude snow on vegetation canopy or on sea ice.
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time
type:              real
valid_min:         0.0
valid_max:         10000.0
!----------------------------------
!

!============
variable_entry:    tasmin
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     air_temperature
units:             K
cell_methods:      time: minimum
cell_measures:     area: areacella
long_name:         Daily Minimum Near-Surface Air Temperature
comment:           minimum near-surface (usually, 2 meter) air temperature (add cell_method attribute time: min)
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time height2m
type:              real
valid_min:         0.0
valid_max:         1000.0
!----------------------------------
!

!============
variable_entry:    tasmax
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     air_temperature
units:             K
cell_methods:      time: maximum
cell_measures:     area: areacella
long_name:         Daily Maximum Near-Surface Air Temperature
comment:           maximum near-surface (usually, 2 meter) air temperature (add cell_method attribute time: max)
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time height2m
type:              real
valid_min:         0.0
valid_max:         1000.0
!----------------------------------
!

!============
variable_entry:    tpp
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
!FAILS CF25 standard_name:     tropopause_pressure
units:             Pa
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Tropopause Pressure
comment:           Only required for the first day 00:00 UTC of each month. The tropopause follows the WMO definition and should be consistent with the the tropopause definition used for tpo3chm and lso3chm.
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time
type:              real
valid_min:         100.0
valid_max:         1000000.0
!----------------------------------
!

!============
variable_entry:    sfvmrco_25
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
!FAILS CF25 standard_name:     mass_fraction_of_co-25_tracer_in_air
units:             kg kg-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         co_25 Mass Mixing Ratio in Surface Layer
comment:           daily mean or instantaneous? emitted as anthropogenic CO (emission file available from HTAP, ftp://ftp.retro.enes.org/pub/emissions/aggregated/anthro/0.5x0.5/2000/RETRO_ANTHRO_V2_2000_CO_aggregated.nc but only use annual mean), uniform fixed 25-day exponential decay.
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    sfmmrso2t
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
!FAILS CF25 standard_name:     mass_fraction_of_so2t_tracer_in_air
units:             kg kg-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         so2t Mass Mixing Ratio in Surface Layer
comment:           daily mean or instantaneous? emitted as anthropogenic year 2000 SO2 (as specified in REF-C1, wet removal as SO2.
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    sfmmraerno3
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mass_fraction_of_nitrate_dry_aerosol_in_air
units:             kg kg-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Aerosol Nitrate Mass Mixing Ratio in the Lowest Model Layer
comment:           NO3 aerosol
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    sfmmraerso4
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mass_fraction_of_sulfate_dry_aerosol_in_air
units:             kg kg-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Aerosol Sulfate Mass Mixing Ratio in the Lowest Model Layer
comment:           SO4
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    sfmmraernh4
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mass_fraction_of_ammonium_dry_aerosol_in_air
units:             kg kg-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Aerosol Ammonium Mass Mixing Ratio in the Lowest Model Layer
comment:           Aerosol NH4
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    sfmmrbc
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mass_fraction_of_black_carbon_dry_aerosol_in_air
units:             kg kg-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         BC Mass Mixing Ratio in the Lowest Model Layer
comment:           BC
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    sfmmrpom
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mass_fraction_of_particulate_organic_matter_dry_aerosol_in_air
units:             kg kg-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         POM Mass Mixing Ratio in the Lowest Model Layer
comment:           POM
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    sfmmrsoa
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mass_fraction_of_secondary_particulate_organic_matter_dry_aerosol_in_air
units:             kg kg-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         SOA Mass Mixing Ratio in the Lowest Model Layer
comment:           SOA
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    sfmmrss
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mass_fraction_of_seasalt_dry_aerosol_in_air
units:             kg kg-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Sea Salt Mass Mixing Ratio in Lowest Model Layer
comment:           seasalt  
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    sfmmrdust
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mass_fraction_of_dust_dry_aerosol_in_air
units:             kg kg-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Dust Aerosol Mass Mixing Ratio in Lowest Model Layer
comment:           dust  
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    sfmmraerh2o
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mass_fraction_of_water_in_ambient_aerosol_in_air
units:             kg kg-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Aerosol Water Mass Mixing Ratio in Lowest Model Layer
comment:           aerosol water 
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    sfvmro3
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_ozone_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Ozone Volume Mixing Ratio in Lowest Model Layer
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    pr
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     precipitation_flux
units:             kg m-2 s-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Precipitation
comment:           at surface; includes both liquid and solid phases from all types of clouds (both large-scale and convective)
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time
type:              real
valid_min:         0.0
valid_max:         1000.0
!----------------------------------
!

!============
variable_entry:    maxpblz
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     atmosphere_boundary_layer_thickness
units:             m
cell_methods:      time: maximum
cell_measures:     area: areacella
long_name:         Daily Maximum PBL Height
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time
type:              real
valid_min:         0.0
valid_max:         20000.0
!----------------------------------
!

!============
variable_entry:    minpblz
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     atmosphere_boundary_layer_thickness
units:             m
cell_methods:      time: minimum
cell_measures:     area: areacella
long_name:         Daily Minimum PBL Height
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time
type:              real
valid_min:         0.0
valid_max:         20000.0
!----------------------------------
!

!============
variable_entry:    cod
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     atmosphere_optical_thickness_due_to_cloud
units:             1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Cloud Optical Depth
comment:           This is the in-cloud optical depth obtained by considering only the cloudy portion of the grid cell.
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time
type:              real
valid_min:         0.0
valid_max:         100000.0
!----------------------------------
!

!============
variable_entry:    clt
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     cloud_area_fraction
units:             %
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Total Cloud Fraction
comment:           For the whole atmospheric column, as seen from the surface or the top of the atmosphere.  Include both large-scale and convective cloud.
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time
type:              real
valid_min:         0.0
valid_max:         101.0
!----------------------------------
!

!============
variable_entry:    vmrco_50ea700
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
!FAILS CF25 standard_name:     mole_fraction_of_specified_co-50ea_tracer_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         co_50_ea Volume Mixing Ratio at 700 hPa
comment:           daily mean, emitted as anthropogenic CO over East Asia (15N-50N; 95E-160E),  (emission file available from HTAP), uniform fixed 50-day exponential decay.
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time pr700
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrco_50na700
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
!FAILS CF25 standard_name:     mole_fraction_of_specified_co-50na_tracer_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         co_50_na Volume Mixing Ratio at 700 hPa
comment:           daily mean, emitted as anthropogenic CO over North America (15N-55N; 60W-125W) (emission file available from HTAP), uniform fixed 50-day exponential decay.
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time pr700
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrco_50eu700
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
!FAILS CF25 standard_name:     mole_fraction_of_specified_co-50eu_tracer_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         co_50_eu Volume Mixing Ratio at 700 hPa
comment:           daily mean, emitted as anthropogenic CO over Europe (25N-65N; 10W-50E) (emission file available from HTAP), uniform fixed 50-day exponential decay.
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time pr700
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrco_50sa700
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
!FAILS CF25 standard_name:     mole_fraction_of_specified_co-50sa_tracer_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         co_50_sa Volume Mixing Ratio at 700 hPa
comment:           daily mean, emitted as anthropogenic CO over South Asia (5N-35N; 50E-95E) (emission file available from HTAP), uniform fixed 50-day exponential decay.
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time pr700
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    sic
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     sea_ice_area_fraction
units:             %
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Sea Ice Area Fraction
comment:           fraction of grid cell covered by sea ice.
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude time
type:              real
valid_min:         0.0
valid_max:         101.0
!----------------------------------
!

!============
variable_entry:    pmlev
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     air_pressure
units:             Pa
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Air Pressure
comment:           The atmospheric pressure at the model layer midpoints for all times and levels in the associated output variables
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1000000.0
!----------------------------------
!

!============
variable_entry:    pilev
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
!FAILS CF25 standard_name:     air_pressure_at_model_level_interface
units:             Pa
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Air Pressure at Interfaces
comment:           The atmospheric pressure at the model layer interfaces for all times and levels in the associated output variables
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1000000.0
!----------------------------------
!

!============
variable_entry:    ta
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     air_temperature
units:             K
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Air Temperature
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1000.0
!----------------------------------
!

!============
variable_entry:    ua
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     eastward_wind
units:             m s-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Eastward Wind
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         -1000.0
valid_max:         1000.0
!----------------------------------
!

!============
variable_entry:    va
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     northward_wind
units:             m s-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Northward Wind
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         -1000.0
valid_max:         1000.0
!----------------------------------
!

!============
variable_entry:    wap
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     lagrangian_tendency_of_air_pressure
units:             Pa s-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         omega (=dp/dt)
comment:           omega
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         -1000.0
valid_max:         1000.0
!----------------------------------
!

!============
variable_entry:    zg
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     geopotential_height
units:             m
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Geopotential Height
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         -1000.0
valid_max:         500000.0
!----------------------------------
!

!============
variable_entry:    vmro3
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_ozone_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         O3 Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrn2o
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_nitrous_oxide_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         N2O Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrch4
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_methane_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         CH4 Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrhcl
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_hydrogen_chloride_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         HCl Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrh2o
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_water_vapor_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         H2O Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmro3psv
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
!FAILS CF25 standard_name:     mole_fraction_of_passive_ozone_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Passive O3 Volume Mixing Ratio
comment:           Passive O3 (if available): The model runs should include a tracer to diagnose polar chemical ozone loss in winter and spring. As most models will advect (and integrate) O3 as part of the 'odd oxygen' (Ox=O3 + O(3P) + O(1D)) family we will call this the 'passive Ox tracer'. This will be a global tracer which is reset during each polar winter (i.e. twice per year). Given the relatively slow transport and long chemical lifetime (without PSC processing etc) of O3 in the polar regions this will provide a useful diagnostic over the timescale of a few months in the lower stratosphere. The model tracer should be set equal to your advected 'odd oxygen' tracer on December 1 and June 1 every year. Then, the tracer is simply advected without any further chemical change. If your advection scheme stores other variables for each tracer (e.g. higher order moments) remember to set sum of these species. The passive Ox tracer should be ouput according to the other instructions. The re-initialisation dates are selected so that we diagnose most of the chemical loss over the course of the winter, some of which would be missed by a later date.
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    sad_sulf
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
!FAILS CF25 standard_name:     particle_surface_area_density_of_sulfate_aerosol
units:             m-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Surface Area Density of Sulfate Aerosol
comment:           sulfate aerosol surface area density used in heterogeneous activation of ClOx and BrOx. Defined as the area of aerosol per volume of atmosphere (i.e., m2 m-3 = m-1). This is the total sulfate SAD (i.e., sum of binary and ternary aerosol).
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    sad_nat
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
!FAILS CF25 standard_name:     particle_surface_area_density_of_nitric_acid_trihydate
units:             m-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Surface Area Density of NAT PSC Particles
comment:           nitric acid trihydrate (NAT) surface area density used in heterogeneous activation of ClOx and BrOx. Defined as the area of aerosol per volume of atmosphere (i.e., m2 m-3 = m-1).
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    sad_ice
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
!FAILS CF25 standard_name:     particle_surface_area_density_of_water_ice
units:             m-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Surface Area Density of Water Ice PSC Particles
comment:           water-ice surface area density used in heterogeneous activation of ClOx and BrOx. Defined as the area of aerosol per volume of atmosphere (i.e., m2 m-3 = m-1).
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrcfcl3
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_cfc11_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         CFCl3 Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrcf2cl2
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_cfc12_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         CF2Cl2 Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrch3cl
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_methyl_chloride_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         CH3Cl Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrch3br
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_methyl_bromide_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         CH3Br Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrcl
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_atomic_chlorine_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Atomic Cl Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrclo
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_chlorine_monoxide_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         ClO Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrcl2o2
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_dichlorine_peroxide_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         ClOOCl Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrhocl
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_hypochlorous_acid_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         HOCl Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrclono2
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_chlorine_nitrate_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         ClONO2 Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmroclo
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_chlorine_dioxide_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         OClO Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrcly
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_inorganic_chlorine_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Total Inorganic Chlorine (Cly) Volume Mixing Ratio
comment:           Total family (the sum of all appropriate species in the model) ; list the species in the netCDF header, e.g. Cly = HCl + ClONO2 + HOCl + ClO + Cl + 2*Cl2O2 +2Cl2 + OClO + BrCl.  Definition: Total inorganic stratospheric chlorine (e.g., HCl, ClO) resulting from degradation of chlorine-containing source gases (CFCs, HCFCs, VSLS), and natural inorganic chlorine sources (e.g., sea salt and other aerosols).
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmroh
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_hydroxyl_radical_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         OH Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrho2
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_hydroperoxyl_radical_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         HO2 Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrh2o2
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_hydrogen_peroxide_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         H2O2 Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrh2
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_molecular_hydrogen_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         H2 Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrn
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_atomic_nitrogen_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Atomic N Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrno
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_nitrogen_monoxide_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         NO Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrno2
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_nitrogen_dioxide_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         NO2 Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrhno3
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_nitric_acid_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         HNO3 Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrn2o5
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_dinitrogen_pentoxide_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         N2O5 Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrhno4
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_peroxynitric_acid_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         HNO4 Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrnoy
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_total_reactive_nitrogen_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Total Reactive Nitrogen (NOy) Volume Mixing Ratio
comment:           Total family (the sum of all appropriate species in the model); list the species in the netCDF header, e.g. NOy = N + NO + NO2 + NO3 + HNO3 + 2N2O5 + HNO4 + ClONO2 + BrONO2.  Definition: Total reactive nitrogen; usually includes atomic nitrogen (N), nitric oxide (NO), NO2, nitrogen trioxide (NO3), dinitrogen radical (N2O5), nitric acid (HNO3), peroxynitric acid (HNO4), BrONO2, ClONO2.
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrbr
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_atomic_bromine_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Atomic Br Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrbro
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_bromine_monoxide_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         BrO Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrbrcl
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_bromine_chloride_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         BrCl Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrhbr
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_hydrogen_bromide_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         HBr Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrhobr
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_hypobromous_acid_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         HOBr Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrbrono2
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_bromine_nitrate_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         BrONO2 Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrbry
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_total_inorganic_bromine_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Total Inorganic Bromine (Bry) Volume Mixing Ratio
comment:           Total family (the sum of all appropriate species in the model) ; list the species in the netCDF header, e.g. Bry = Br + BrO + HOBr + HBr + BrONO2 + BrCl.  Definition: Total inorganic bromine (e.g., HBr and inorganic bromine oxides and radicals (e.g., BrO, atomic bromine (Br), bromine nitrate (BrONO2)) resulting from degradation of bromine-containing organic source gases (halons, methyl bromide, VSLS), and natural inorganic bromine sources (e.g., volcanoes, sea salt, and other aerosols).
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrch2o
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_formaldehyde_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         CH2O Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrch3ooh
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_methyl_hydroperoxide_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         CH3OOH Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrco
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_carbon_monoxide_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         CO Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrco2
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_carbon_dioxide_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         CO2 Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    mean_age
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     age_of_stratospheric_air
units:             years
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Mean Age of Stratospheric Air
comment:           The mean age of air is defined as the mean time that a stratospheric air mass has been out of contact with the well-mixed troposphere.
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         20.0
!----------------------------------
!

!============
variable_entry:    vmrc2h6
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_ethane_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         C2H6 Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrc2h2
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_ethyne_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         C2H2 Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmrhcn
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_hydrogen_cyanide_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         HCN Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    tntsw
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     tendency_of_air_temperature_due_to_shortwave_heating
units:             K s-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Shortwave Heating Rate
comment:           shortwave heating rates
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         -1000.0
valid_max:         1000.0
!----------------------------------
!

!============
variable_entry:    tntlw
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     tendency_of_air_temperature_due_to_longwave_heating
units:             K s-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Longwave Heating Rate
comment:           longwave heating rates
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         -1000.0
valid_max:         1000.0
!----------------------------------
!

!============
variable_entry:    cl
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     cloud_area_fraction_in_atmosphere_layer
units:             %
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Cloud Area Fraction
comment:           Include both large-scale and convective cloud.
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         101.0
!----------------------------------
!

!============
variable_entry:    clc
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     convective_cloud_area_fraction_in_atmosphere_layer
units:             %
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         Convective Cloud Area Fraction
comment:           Convective cloud fraction
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         101.0
!----------------------------------
!

!============
variable_entry:    vmro3ste
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
!FAILS CF25 standard_name:     mole_fraction_of_specified_o3ste_tracer_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         O3ste Volume Mixing Ratio
comment:           Ozone tracer intended to map out strat-trop exchange (STE) of ozone: (a) set o3ste to O3 at top layer; (b) use standard O3 P-L terms to change o3ste every chemistry time step for 'stratospheric' air grid boxes; (c) reset o3ste to O3 in the lowermost layers (fix these layers to be up to sigma=0.9, ~1 km altitude) and record this tropospheric reset only as a 2-D (lat,long) monthly mean tendency (Tg/s or Tg per month pergird cell).  Determine 'stratospheric' air in any way that is most convenient (e90, O3, PV-theta, etc).
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmre90
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
!FAILS CF25 standard_name:     mole_fraction_of_specified_e90_tracer_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         e90 Volume Mixing Ratio
comment:           Synthetic tracer e90 has 90-day e-fold everywhere; emitted uniformly (g/m2) over all land/ocean/ice; see Prather et al. 2011 JGR 116, D04306, doi:10.1029/2010JD014939; any normalization can be used if defined, but UCI chooses: mol.wt = 28.97(dry air), emissions = 2074 Tg/y (kg/m2/s) , thus steady-state mean mole fraction = 100 ppb (for ECMWF dry air mass).
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmre90n
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
!FAILS CF25 standard_name:     mole_fraction_of_specified_e90n_tracer_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         e90n Volume Mixing Ratio
comment:           Synthetic tracer e90n, same as e90, but emitted only 40N to 90N.
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    vmre90s
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
!FAILS CF25 standard_name:     mole_fraction_of_specified_e90s_tracer_in_air
units:             mole mole-1
cell_methods:      time: point
cell_measures:     area: areacella
long_name:         e90s Volume Mixing Ratio
comment:           Synthetic tracer e90s, same as e90, but emitted only 40S to 90S.
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude alevel time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    zmta
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     air_temperature
units:             K
cell_methods:      time: mean longitude: mean
cell_measures:     area: areacella
long_name:         Air Temperature
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude plevs time
type:              real
valid_min:         0.0
valid_max:         1000000.0
!----------------------------------
!

!============
variable_entry:    zmzg
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     geopotential_height
units:             m
cell_methods:      time: mean longitude: mean
cell_measures:     area: areacella
long_name:         Geopotential Height
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude plevs time
type:              real
valid_min:         -1000.0
valid_max:         500000.0
!----------------------------------
!

!============
variable_entry:    zmua
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     eastward_wind
units:             m s-1
cell_methods:      time: mean longitude: mean
cell_measures:     area: areacella
long_name:         Eastward Wind
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude plevs time
type:              real
valid_min:         -500.0
valid_max:         500.0
!----------------------------------
!

!============
variable_entry:    vstar
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     northward_transformed_eulerian_mean_air_velocity
units:             m s-1
cell_methods:      time: mean longitude: mean
cell_measures:     area: areacella
long_name:         Northward TEM air velocity
comment:           Transformed Eulerian Mean Diagnostics v*, meridional component of the residual meridional circulation (v*, w*) derived from 6 hr or higher frequency data fields (use instantaneous daily fields or 12 hr fields if the 6 hr data are not available).
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude plevs time
type:              real
valid_min:         -500.0
valid_max:         500.0
!----------------------------------
!

!============
variable_entry:    wstar
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
!FAILS CF25 standard_name:     upward_transformed_eulerian_mean_air_velocity
units:             m s-1
cell_methods:      time: mean longitude: mean
cell_measures:     area: areacella
long_name:         Upward TEM air velocity
comment:           Transformed Eulerian Mean Diagnostics w*, meridional component of the residual meridional circulation (v*, w*) derived from 6 hr or higher frequency data fields (use instantaneous daily fields or 12 hr fields if the 6 hr data are not available). Scale height: 6950 m
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude plevs time
type:              real
valid_min:         -500.0
valid_max:         500.0
!----------------------------------
!

!============
variable_entry:    fy
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     northward_eliassen_palm_flux_in_air
units:             kg s-2
cell_methods:      time: mean longitude: mean
cell_measures:     area: areacella
long_name:         Northward EPF
comment:           Transformed Eulerian Mean Diagnostics Meridional component Fy of EP-flux (Fy, Fz) derived from 6hr or higher frequency fields (use daily fields or 12 hr fields if the 6 hr are not available).  Please use the definitions given by equation 3.5.3a of Andrews, Holton and Leovy text book.
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude plevs time
type:              real
valid_min:         -10000.0
valid_max:         10000.0
!----------------------------------
!

!============
variable_entry:    fz
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     upward_eliassen_palm_flux_in_air
units:             kg s-2
cell_methods:      time: mean longitude: mean
cell_measures:     area: areacella
long_name:         Upward EPF
comment:           Transformed Eulerian Mean Diagnostics Meridional component Fz of EP-flux (Fy, Fz) derived from 6hr or higher frequency fields (use daily fields or 12 hr fields if the 6 hr are not available).  Please use the definitions given by equation 3.5.3b of Andrews, Holton and Leovy text book.
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude plevs time
type:              real
valid_min:         -10000.0
valid_max:         10000.0
!----------------------------------
!

!============
variable_entry:    accel_divf
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     tendency_of_eastward_wind_due_to_eliassen_palm_flux_divergence
units:             m s-2
cell_methods:      time: mean longitude: mean
cell_measures:     area: areacella
long_name:         Tendency of Eastward Wind from EPF Divergence
comment:           Transformed Eulerian Mean Diagnostics Acceleration from the EP-flux divergence (D) derived from 6hr or higher frequency fields (use daily fields or 12 hr fields if the 6 hr are not available).  Please use the definitions given by equation 3.5.2a of Andrews, Holton and Leovy text book.
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude plevs time
type:              real
valid_min:         -1000.0
valid_max:         1000.0
!----------------------------------
!

!============
variable_entry:    zmo3
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_ozone_in_air
units:             mole mole-1
cell_methods:      time: mean longitude: mean
cell_measures:     area: areacella
long_name:         Ozone Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude plevs time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    zmh2o
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_water_vapor_in_air
units:             mole mole-1
cell_methods:      time: mean longitude: mean
cell_measures:     area: areacella
long_name:         Water Vapour Volume Mixing Ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude plevs time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    zmnoy
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_total_reactive_nitrogen_in_air
units:             mole mole-1
cell_methods:      time: mean longitude: mean
cell_measures:     area: areacella
long_name:         Total Reactive Nitrogen Volume Mixing Ratio
comment:           Total family (the sum of all appropriate species in the model); list the species in the netCDF header, e.g. NOy = N + NO + NO2 + NO3 + HNO3 + 2N2O5 + HNO4 + ClONO2 + BrONO2.  Definition: Total reactive nitrogen; usually includes atomic nitrogen (N), nitric oxide (NO), NO2, nitrogen trioxide (NO3), dinitrogen radical (N2O5), nitric acid (HNO3), peroxynitric acid (HNO4), BrONO2, ClONO2
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude plevs time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    zmclo
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_chlorine_monoxide_in_air
units:             mole mole-1
cell_methods:      time: mean longitude: mean
cell_measures:     area: areacella
long_name:         ClO volume mixing ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude plevs time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    zmbro
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
standard_name:     mole_fraction_of_bromine_monoxide_in_air
units:             mole mole-1
cell_methods:      time: mean longitude: mean
cell_measures:     area: areacella
long_name:         BrO volume mixing ratio
comment:           
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        longitude latitude plevs time
type:              real
valid_min:         0.0
valid_max:         1.0
!----------------------------------
!

!============
variable_entry:    psca_nh50
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
!FAILS CF25 standard_name:     arctic_area_integral_of_polar_stratospheric_cloud_area_fraction
units:             m2
cell_methods:      area
cell_measures:     area: areacella
long_name:         Area of PSC at 50 hPa over the Arctic
comment:           Daily PSC Area that is calculated by the model's PSC scheme poleward of 60 degrees at 50 hPa for Nov-April in NH
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        time pr50
type:              real
valid_min:         0.0
valid_max:         5.0E+14
!----------------------------------
!

!============
variable_entry:    psca_sh50
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
!FAILS CF25 standard_name:     antarctic_area_integral_of_polar_stratospheric_cloud_area_fraction
units:             m2
cell_methods:      area
cell_measures:     area: areacella
long_name:         Area of PSCs at 50 hPa over the Antarctic
comment:           Daily PSC Area that is calculated by the model's PSC scheme poleward of 60 degrees at 50 hPa for July-Dec in SH
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        time pr50
type:              real
valid_min:         0.0
valid_max:         5.0E+14
!----------------------------------
!

!============
variable_entry:    area188k_nh50
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
!FAILS CF25 standard_name:     arctic_area_where_air_temperature_less_than_188k
units:             m2
cell_methods:      area
cell_measures:     area: areacella
long_name:         Area over the Arctic at 50 hPa with Air Temperature Less than 188K
comment:           Daily Area where the Temperature poleward of 60 degrees is below 188 K at 50 hPa for Nov-April in NH
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        time pr50
type:              real
valid_min:         0.0
valid_max:         5.0E+14
!----------------------------------
!

!============
variable_entry:    area195k_nh50
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
!FAILS CF25 standard_name:     arctic_area_where_air_temperature_less_than_195k
units:             m2
cell_methods:      area
cell_measures:     area: areacella
long_name:         Area over the Arctic at 50 hPa with Air Temperature Less than 195K
comment:           Daily Area where the Temperature poleward of 60 degrees is below 195 K at 50 hPa for Nov-April in NH
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        time pr50
type:              real
valid_min:         0.0
valid_max:         5.0E+14
!----------------------------------
!

!============
variable_entry:    area188k_sh50
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
!FAILS CF25 standard_name:     antarctic_area_where_air_temperature_less_than_188k
units:             m2
cell_methods:      area
cell_measures:     area: areacella
long_name:         Area over the Antarctic at 50 hPa with Air Temperature Less and 188K
comment:           Daily Area where the Temperature poleward of 60 degrees is below 188 K at 50 hPa for July-Dec in SH
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        time pr50
type:              real
valid_min:         0.0
valid_max:         5.0E+14
!----------------------------------
!

!============
variable_entry:    area195k_sh50
!============
modeling_realm:    atmos
!----------------------------------
! Variable attributes:
!----------------------------------
!FAILS CF25 standard_name:     antarctic_area_where_air_temperature_less_than_195k
units:             m2
cell_methods:      area
cell_measures:     area: areacella
long_name:         Area over the Antarctic at 50 hPa with Air Temperature Less and 195K
comment:           Daily Area where the Temperature poleward of 60 degrees is below 195 K at 50 hPa for July-Dec in SH
!----------------------------------
! Additional variable information:
!----------------------------------
dimensions:        time pr50
type:              real
valid_min:         0.0
valid_max:         5.0E+14
!----------------------------------
!

